MicroPrimer™

200 square feet per gallon (1 coat diluted up to 40-50%)

.18 - .25 cents per sq. ft.  depending on dilution

The product comes natural white.  Should be tinted when dark colors are applied over it to avoid white showing through transparent colors/plasters.

13 ph

50 µm (microns) / 0.05mm

For best results apply one full coat. The primer can also be diluted up to 35-40% with clean water for new construction with level 5 finishes.

Sold by weight. 1kg (1-quart) to 20kg (5-gallons)

44 lbs. / 20 kg. per 5 gallons

MicroPrimer™ is a consolidating micro acrylic water based insulator for internal and external use, and is composed of water soluble acrylic resin. Due to its very fine particles, this special primer permits the primer to be absorbed into the surface, creating a bond between the wall and the finish product you choose to apply. It can be used under any of our plasters and works especially well under or finer products like Grassello and Milano Metallics. MicroPrimer™ is excellent for application on concrete, stucco, plaster, asbestos cement or drywall allowing for a bond between the finish products and the substrate. It is particularly indicated for use on walls that have been painted with emulsion or enameled paints.